Email Class
CodeIgniter’s robust Email Class supports the following features:
Multiple Protocols: Mail, Sendmail, and SMTP
TLS and SSL Encryption for SMTP
Multiple recipients
CC and BCCs
HTML or Plaintext email
Attachments
Word wrapping
Priorities
BCC Batch Mode, enabling large email lists to be broken into small BCC batches.
Email Debugging tools
Using the Email Library
Sending Email
Sending email is not only simple, but you can configure it on the fly or set your preferences in the app/Config/Email.php file.
Here is a basic example demonstrating how you might send email:
<?php
$email = service('email');
$email->setFrom('[email protected]', 'Your Name');
$email->setTo('[email protected]');
$email->setCC('[email protected]');
$email->setBCC('[email protected]');
$email->setSubject('Email Test');
$email->setMessage('Testing the email class.');
$email->send();
Setting Email Preferences
There are 21 different preferences available to tailor how your email messages are sent. You can either set them manually as described here, or automatically via preferences stored in your config file, described in Email Preferences.
Setting Email Preferences by Passing an Array
Preferences are set by passing an array of preference values to the email initialize method. Here is an example of how you might set some preferences:
<?php
$config['protocol'] = 'sendmail';
$config['mailPath'] = '/usr/sbin/sendmail';
$config['charset'] = 'iso-8859-1';
$config['wordWrap'] = true;
$email->initialize($config);
Note
Most of the preferences have default values that will be used if you do not set them.
Setting Email Preferences in a Config File
If you prefer not to set preferences using the above method, you can
instead put them into the config file. Simply open the
app/Config/Email.php file, and set your configs in the
Email properties. Then save the file and it will be used automatically.
You will NOT need to use the $email->initialize()
method if
you set your preferences in the config file.
SSL versus TLS for SMTP Protocol
To protect the username, password and email content while communicating with the SMTP server, encryption on the channel should be used. Two different standards are widely deployed and it is important to understand the differences when trying to troubleshoot email sending issues.
Most SMTP servers allow connections on ports 465 or 587 when submitting emails. (The original port 25 is seldom used because of many ISPs have blocking rules in place and since the communication is entirely in clear-text).
The key difference is that port 465 expects the communication channel to be secured using TLS
from the start as per RFC 8314.
A connection to port 587 allows clear-text connection and later
will upgrade the channel to use encryption using the STARTTLS
SMTP command.
Upgrading a connection on port 465 may or may not be supported by the server, so the
STARTTLS
SMTP command may fail if the server does not allow it. If you set the port to 465,
you should try to set the SMTPCrypto
to an empty string (''
) since the communication is
secured using TLS from the start and the STARTTLS
is not needed.
If your configuration requires you to connect to port 587, you should most likely set
SMTPCrypto
to tls
as this will implement the STARTTLS
command while communicating
with the SMTP server to switch from clear-text to an encrypted channel. The initial communication
will be made in clear-text and the channel will be upgraded to TLS with the STARTTLS
command.
Reviewing Preferences
The settings used for the last successful send are available from the
instance property $archive
. This is helpful for testing and debugging
to determine that actual values at the time of the send()
call.
Email Preferences
The following is a list of all the preferences that can be set when sending email.
Preference |
Default Value |
Options |
Description |
---|---|---|---|
fromEmail |
The email address to be set in the “from” header. |
||
fromName |
The name to be set in the “from” header. |
||
userAgent |
CodeIgniter |
The “user agent”. |
|
protocol |
|
The mail sending protocol. |
|
mailPath |
/usr/sbin/sendmail |
The server path to Sendmail. |
|
SMTPHost |
SMTP Server Hostname. |
||
SMTPUser |
SMTP Username. |
||
SMTPPass |
SMTP Password. |
||
SMTPPort |
25 |
SMTP Port. (If set to |
|
SMTPTimeout |
5 |
SMTP Timeout (in seconds). |
|
SMTPKeepAlive |
false |
|
Enable persistent SMTP connections. |
SMTPCrypto |
tls |
|
SMTP Encryption. Setting this to |
wordWrap |
true |
|
Enable word-wrap. |
wrapChars |
76 |
Character count to wrap at. |
|
mailType |
text |
|
Type of mail. If you send HTML email you must send it as a complete web page. Make sure you don’t have any relative links or relative image paths otherwise they will not work. |
charset |
UTF-8 |
Character set ( |
|
validate |
true |
|
Whether to validate the email address. |
priority |
3 |
1, 2, 3, 4, 5 |
Email Priority. |
CRLF |
\r\n |
|
Newline character. (Use |
newline |
\r\n |
|
Newline character. (Use |
BCCBatchMode |
false |
|
Enable BCC Batch Mode. |
BCCBatchSize |
200 |
Number of emails in each BCC batch. |
|
DSN |
false |
|
Enable notify message from server. |
Overriding Word Wrapping
If you have word wrapping enabled (recommended to comply with RFC 822) and you have a very long link in your email it can get wrapped too, causing it to become un-clickable by the person receiving it. CodeIgniter lets you manually override word wrapping within part of your message like this:
The text of your email that
gets wrapped normally.
{unwrap}http://example.com/a_long_link_that_should_not_be_wrapped.html{/unwrap}
More text that will be
wrapped normally.
Place the item you do not want word-wrapped between: {unwrap} {/unwrap}
Class Reference
- class CodeIgniter\Email\Email
- setFrom($from[, $name = ''[, $returnPath = null]])
- Parameters:
$from (
string
) – “From” email address$name (
string
) – “From” display name$returnPath (
string
) – Optional email address to redirect undelivered email to
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the email address and name of the person sending the email:
<?php $email->setFrom('[email protected]', 'Your Name');
You can also set a Return-Path, to help redirect undelivered mail:
<?php $email->setFrom('[email protected]', 'Your Name', '[email protected]');
Note
Return-Path can’t be used if you’ve configured ‘smtp’ as your protocol.
- setReplyTo($replyto[, $name = ''])
- Parameters:
$replyto (
string
) – Email address for replies$name (
string
) – Display name for the reply-to email address
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the reply-to address. If the information is not provided the information in the setFrom method is used. Example:
<?php $email->setReplyTo('[email protected]', 'Your Name');
- setTo($to)
- Parameters:
$to (
mixed
) – Comma separated string or an array of email addresses
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the email address(es) of the recipient(s). Can be a single email, a comma separated list or an array:
<?php $email->setTo('[email protected]');
<?php $email->setTo('[email protected], [email protected], [email protected]');
<?php $email->setTo(['[email protected]', '[email protected]', '[email protected]']);
- setCC($cc)
- Parameters:
$cc (
mixed
) – Comma separated string or an array of email addresses
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the CC email address(es). Just like the “to”, can be a single email, a comma separated list or an array.
- setBCC($bcc[, $limit = ''])
- Parameters:
$bcc (
mixed
) – Comma separated string or an array of email addresses$limit (
int
) – Maximum number of emails to send per batch
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the BCC email address(es). Just like the
setTo()
method, can be a single email, a comma separated list or an array.If
$limit
is set, “batch mode” will be enabled, which will send the emails to batches, with each batch not exceeding the specified$limit
.
- setSubject($subject)
- Parameters:
$subject (
string
) – Email subject line
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the email subject:
<?php $email->setSubject('This is my subject');
- setMessage($body)
- Parameters:
$body (
string
) – Email message body
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the email message body:
<?php $email->setMessage('This is my message');
- setAltMessage($str)
- Parameters:
$str (
string
) – Alternative email message body
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Sets the alternative email message body:
<?php $email->setAltMessage('This is the alternative message');
This is an optional message string which can be used if you send HTML formatted email. It lets you specify an alternative message with no HTML formatting which is added to the header string for people who do not accept HTML email. If you do not set your own message CodeIgniter will extract the message from your HTML email and strip the tags.
- setHeader($header, $value)
- Parameters:
$header (
string
) – Header name$value (
string
) – Header value
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Appends additional headers to the email:
<?php $email->setHeader('Header1', 'Value1'); $email->setHeader('Header2', 'Value2');
- clear($clearAttachments = false)
- Parameters:
$clearAttachments (
bool
) – Whether or not to clear attachments
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Initializes all the email variables to an empty state. This method is intended for use if you run the email sending method in a loop, permitting the data to be reset between cycles.
<?php foreach ($list as $name => $address) { $email->clear(); $email->setTo($address); $email->setFrom('[email protected]'); $email->setSubject('Here is your info ' . $name); $email->setMessage('Hi ' . $name . ' Here is the info you requested.'); $email->send(); }
If you set the parameter to true any attachments will be cleared as well:
<?php $email->clear(true);
- send($autoClear = true)
- Parameters:
$autoClear (
bool
) – Whether to clear message data automatically
- Returns:
true on success, false on failure
- Return type:
bool
The email sending method. Returns boolean true or false based on success or failure, enabling it to be used conditionally:
<?php if (! $email->send()) { // Generate error }
This method will automatically clear all parameters if the request was successful. To stop this behaviour pass false:
<?php if ($email->send(false)) { // Parameters won't be cleared }
Note
In order to use the
printDebugger()
method, you need to avoid clearing the email parameters.Note
If
BCCBatchMode
is enabled, and there are more thanBCCBatchSize
recipients, this method will always return booleantrue
.
- attach($filename[, $disposition = ''[, $newname = null[, $mime = '']]])
- Parameters:
$filename (
string
) – File name$disposition (
string
) – ‘disposition’ of the attachment. Most email clients make their own decision regardless of the MIME specification used here. https://www.iana.org/assignments/cont-disp/cont-disp.xhtml$newname (
string
) – Custom file name to use in the email$mime (
string
) – MIME type to use (useful for buffered data)
- Returns:
CodeIgniter\Email\Email instance (method chaining)
- Return type:
Enables you to send an attachment. Put the file path/name in the first parameter. For multiple attachments use the method multiple times. For example:
<?php $email->attach('/path/to/photo1.jpg'); $email->attach('/path/to/photo2.jpg'); $email->attach('/path/to/photo3.jpg');
To use the default disposition (attachment), leave the second parameter blank, otherwise use a custom disposition:
<?php $email->attach('image.jpg', 'inline');
You can also use a URL:
<?php $email->attach('http://example.com/filename.pdf');
If you’d like to use a custom file name, you can use the third parameter:
<?php $email->attach('filename.pdf', 'attachment', 'report.pdf');
If you need to use a buffer string instead of a real - physical - file you can use the first parameter as buffer, the third parameter as file name and the fourth parameter as mime-type:
<?php $email->attach($buffer, 'attachment', 'report.pdf', 'application/pdf');
- setAttachmentCID($filename)
- Parameters:
$filename (
string
) – Existing attachment filename
- Returns:
Attachment Content-ID or false if not found
- Return type:
string
Sets and returns an attachment’s Content-ID, which enables you to embed an inline (picture) attachment into HTML. First parameter must be the already attached file name.
<?php $filename = '/img/photo1.jpg'; $email->attach($filename); foreach ($list as $address) { $email->setTo($address); $cid = $email->setAttachmentCID($filename); $email->setMessage('<img src="cid:' . $cid . '" alt="photo1">'); $email->send(); }
Note
Content-ID for each email must be re-created for it to be unique.
- printDebugger($include = ['headers', 'subject', 'body'])
- Parameters:
$include (
array
) – Which parts of the message to print out
- Returns:
Formatted debug data
- Return type:
string
Returns a string containing any server messages, the email headers, and the email message. Useful for debugging.
You can optionally specify which parts of the message should be printed. Valid options are: headers, subject, body.
Example:
<?php // You need to pass false while sending in order for the email data // to not be cleared - if that happens, printDebugger() would have // nothing to output. $email->send(false); // Will only print the email headers, excluding the message subject and body $email->printDebugger(['headers']);
Note
By default, all of the raw data will be printed.